No products in the cart.
Tiếng Việt
日本語
English
中文
Epoxy Top Coat – Rolling type
Epoxy C-804 (Epoxy SC -8284) là một loại nhựa Epoxy có dung môi chống ngả vàng, có khả năng tạo một bề mặt bóng láng cao. Việc trải nhựa Epoxy được làm ở cả nhiệt độ thấp và độ ẩm cao. Nó thích hợp cho việc phủ bề mặt nền và phủ bóng cho các vật dụng trang trí.
Retails: 0 VND(Reference price)
Stock status: In stock
Wholesales: Contact us
Description
Epoxy C-804 (Epoxy SC-8284) is solvent anti-fading/yellow Epoxy resin, and has an excellent glossy surface coating, even under low temperature and high humidity. The construction also can be done. It is most suitable for ground surface coating and glossy surface coating for the decorative.
Feature
- Ground surface coating.
- Acid-alkali resistant coating material.
- Decorative Surface coating.
- Physical property is tested according to ASTM C109, ASTM C348
- Chemical resistance is observed by 7 days socaking in 25oC
- Cost effective, easy construction, smooth, good coverage.
- Non-sticky, anti-dust, easy clean.
- Weak acid and alkaline resistance, safe and non-toxic.
Uses
- Ground thin surface coating.
- Acid-alkali resistant coating material.
- Surface coating for the decorative.
Property
- It’s must be ventilation when doing and finishing construction for quickly drying of coating and high gloss. (If the ventilation is not good, it will occur a white layer on the surface, it will be dry when painting and the coating is also very long drying.
- The concrete surface must be properly polished, not cracked or broken when moving. The floor surface must be thoroughly cleaned to ensure the adhesion of the film.
- Not doing construction when moisture is over 8%.
- When mixing two components A and B, it must be used up after 30-45 minutes.
- Customers will not be warranted if not complying with the technical requirements.
- Drying time of surface : 3-6 hours (depending on weather moisture).
Attention
- Main Agent C-804A: 18 kg/can
- Hardener C-804B: 6 kg/can
Packing
| Description | Main Agent | Hardener |
| Appearance | Darious colored mucus | Yellow brown color |
| Viscosity (BH type 25oC CPS) | 7500 ± 500 | 100 ± 20 |
| Specific gravity (g/cm3) | 1.15 ± 0.1 | 0.95 ± 0.05 |
| Match ratio | 3 | 1 |
| Time used min. | 45 | |
| Hardening time required hr. | 6 hr |