Epoxy Middle Coat

Epoxy Middle Coat

Tags: , , ,

Epoxy C-802 is improved from PU resin Amine-amide type Epoxy, and its viscosity is low and no Amine blush after hardening. Its main features are for long time of using, low temperature, and widely used for civil construction, resin mortar seam filling, and electronic parts, etc …

Retails: 0 VND(Reference price)

Stock status: In stock

Wholesales: Contact us

Call for detail

Place your phone, we will call to you !!!

Description

Epoxy C-802 is improved from PU resin Amine-amide type Epoxy, and its viscosity is low and no Amine blush after hardening. Its main features are for long time of using, low temperature, and widely used for civil construction, resin mortar seam filling, and electronic parts, etc …

Feature

  1. Solventless coating material
  2. Civil construction, mortar, seam filling, and anti-abrasion ground material.
  3. Electronic partsfilling.
  4. Physical property is tested according to ASTM C109, C348.
  5. Chemical resistance is observed by 7 days socaking in 25oC.

Property

Description Main Agent C-802A Hardener C-802B
Appearance Transparent Yellow brown color
Viscosity (BH type 25oC CPS) 1370± 100  1000±100
Specific gravity (g/cm3)  0.98±0.02 0.97±0.02
Match ratio 2  1
Time used min. 40
Hardening time required hr. 8hr

 

Attention

  • Mixxing carefully componant A (C-802A) and B (C-802B) as the rate.
  • Mixxing by hand with small quantity, mixxing by machines with big quantity.
  • Using roller or brush to paint evenly for primer absorbing to construction substrate .
  • It’s must be ventilation when doing and finishing construction for quickly drying of coating and high gloss. (If the ventilation is not good, it will occur a white layer on the surface, it will be dry when painting and the coating is also very long drying.
  • Not doing construction when moisture is over 8%.
  • When mixing two components A and B, it must be used up after 30-45 minutes.
  • Customers will not be warranted if not complying with the technical requirements.
  • Drying time of surface : 3-6 hours (depending on weather moisture).

Packing

Main Agent C-802A: 18kg/can

Hardener C-802B: 9kg/can

Customized Request

Chat Zalo